The 110mm Anthracite Grey Push-Fit Air Admittance Valve allows a soil stack fitted with an external air admittance valve to terminate within three metres of a window opening. This allows the pipe to terminate at the same height as if it were installed...

The 110mm Black Push-Fit Air Admittance Valve allows a soil stack fitted with an external air admittance valve to terminate within three metres of a window opening. This allows the pipe to terminate at the same height as if it were installed internally...

The 110mm Anthracite Grey Soil Pipe Strap on Pipe Connector allows you to add a waste pipe to a soil system without the use of a fitting. Simple calculate the point at which you want the waste pipe to enter the soil pipe cut a hole in the pipe using a...

The 110mm Grey Soil Pipe Vent Terminal fits over exposed ends of 110mm soil pipe and prevents birds squirrels and large debris entering the soil system.

The 135° Grey Ring Seal Top/Solvent Bottom 110mm Soil Pipe Offset Bend is generally used for changing the direction of 110mm soil pipe. This product is used as the top bend when forming an offset bend at the top of a soil stack with a 158925 bend used...

The 110mm Anthracite Grey Short Soil Boss Pipe Socket/Spigot allows the connection of up to 3 separate waste pipes to the soil system. The boss pipe has one open and 2 closed bosses to use the open boss fit the appropriate adaptor which will allow a 32mm...

The 92.5° Grey Socket/Spigot 110mm Soil Pipe Bend is used for changing the direction of 110mm soil pipe systems. This push-fit bend has a spigot at 1 end which should always form the lower joint and a socket at the other end.

The 0° to 90° Anthracite Grey Double Socket 110mm Soil Pipe Adjustable Bend has a double socket and allows you to adjust the bend angle from 0° to 90° to suit a situation when a standard fixed angle bend will not form the desired angle.

The 110mm Anthracite Grey Double Socket Coupling is used to form a push-fit joint between 2 lengths of 110mm soil pipes. This product can also be used as a slip coupling by simply removing the centre stops in the middle of the product.

The 110mm White Soil Pipe Single Socket 1m has a single socket for simple connection to soil systems. The pipe can be cut to length using a fine tooth saw the cut end should always be chamfered prior to installation and the socketed end of the pipe should...