The 110mm Soil Pipe Single Socket 3m has a single socket for simple connection to soil systems. The pipe can be cut to length using a fine tooth saw the cut end should always be chamfered prior to installation and the socketed end of the pipe should always...

The 110mm Black Soil Pipe Single Socket 3m has a single socket for simple connection to soil systems. The pipe can be cut to length using a fine tooth saw the cut end should always be chamfered prior to installation and the socketed end of the pipe should...

The 92.5° Black Socket/Spigot 110mm Soil Pipe Bend is used for changing the direction of 110mm soil pipe systems. This push-fit bend has a spigot at 1 end which should always form the lower joint and a socket at the other end.

The 110mm Grey Soil Pipe Strap on Pipe Connector allows you to add a waste pipe to a soil system without the use of a fitting. Simple calculate the point at which you want the waste pipe to enter the soil pipe cut a hole in the pipe using a 54mm - 56mm...

The 110mm Anthracite Grey Soil Pipe Strap on Pipe Connector allows you to add a waste pipe to a soil system without the use of a fitting. Simple calculate the point at which you want the waste pipe to enter the soil pipe cut a hole in the pipe using a...

The 135° Grey Ring Seal Top/Solvent Bottom 110mm Soil Pipe Offset Bend is generally used for changing the direction of 110mm soil pipe. This product is used as the top bend when forming an offset bend at the top of a soil stack with a 158925 bend used...

The 92.5° Grey Double Socket/Spigot 110mm Soil Pipe Branch allows the connection of horizontal pipes to vertical soil stack systems. The branch has two closed side bosses which when drilled out using a 50mm - 57mm hole cutter and boss adaptors are fitted...

The 110mm Anthracite Grey Short Soil Boss Pipe Socket/Spigot allows the connection of up to 3 separate waste pipes to the soil system. The boss pipe has one open and 2 closed bosses to use the open boss fit the appropriate adaptor which will allow a 32mm...

The 92.5° Grey Socket/Spigot 110mm Soil Pipe Bend is used for changing the direction of 110mm soil pipe systems. This push-fit bend has a spigot at 1 end which should always form the lower joint and a socket at the other end.

The 0° to 90° Anthracite Grey Double Socket 110mm Soil Pipe Adjustable Bend has a double socket and allows you to adjust the bend angle from 0° to 90° to suit a situation when a standard fixed angle bend will not form the desired angle.