Features the ability to move the arm to either the left or right from standard positions so it does not foul against the cistern or siphon body. Fits virtually all float-operated cisterns. Swivel adjustment allows float to be fixed through 180°. Side-Entry...

Replacement ball valve diaphragm washer pack. Fits most part 1, 2 and 3 valves. Can be used for both brass ballcocks and part 3 ball valves.

Rated PN16. ¼ turn operation. Full bore. For water, steam, oil and air. Compression Fitting

Easy to install rubber float valve diaphragm washer suitable for multi-pressure applications. 30 mm diameter. Supplied with fitting instructions. Easy to Install

Self-closing valve with membrane that opens under water pressure to allow discharge to flow freely and then closes to form a seal to prevent the circulation of foul odour. Can be fitted in a horizontal or vertical position. Can be used to take discharge...

Clips itself to tyre valve for added safety. Open-ended connector with a pin which unseats the tyres valve when is use. 1/4” BSP Female Inlet Connection Suitable for Inflation of Twin Tyres

Universal valve to fit standard 32, 40 and 50mm solvent weld waste pipe.

For use in circulating hot water systems. Balances the system by regulating the flow within it depending on the temperature. Will restrict the flow as the temperature rises to its set point but at 70°C a bypass will open, allowing a higher flow rate...

Designed to control the temperature of hot water to a safe and comfortable level. Suitable for both domestic and commercial applications. Rapid shutdown on either hot or cold supply failure. Union connectors for total installation flexibility. Purpose-built...

Self-closing valve with membrane that opens under water pressure to allow discharge to flow freely and then closes to form a seal to prevent the circulation of foul odour. Can be fitted in a horizontal or vertical position. Can be used as a slimline pedestal...