For the installation and removal of the lockring on both Shimano HG and SRAM cassettes, when used together with a 24mm spanner or socket and a cassette holding tool or chain whip. It can also be used on Centerlock brake discs that use a 12-spline (Ø23.4mm)...

For use when having to guide new cables through an internally routed frame, this kit uses magnets to make light work of a task that can be both time-consuming and frustrating. It comes supplied with adaptors to fit inner gear & brake cables, Shimano Di2...

Disc brake tool combining two different functions to ensure that brake rotors can run freely and quietly through the caliper. At one end is a rotor truing fork, with two different length slots allowing for different degrees of leverage to be applied to...

Folding tool kit including a range of essential tools to carry out most road and trail side repairs. The ultra slim size of this alloy multi-tool means that it will easily fit into any saddle bag, back pack, or pocket

Designed to access the narrow spaces behind the chainset, this low profile chainring nut spanner holds the nut still to prevent it from turning when tightening or loosening the chainring bolt using a Hex or Star key.

Allows for the quick and easy installation of press fit bottom brackets without risking damage to the frame. The stepped plates clamp either side of the axle allowing the force screw to be turned, pressing the bearing cups into the bottom bracket shell....

For use on 3/32” chains, this chain tool is used to remove and install chain rivets. Both the main handle and T-handle of the driver have a cushioned grip, so are comfortable to hold when applying the force necessary to wind the rivet through the links....

This headset cup removal tool allows for the quick, easy and safe removing of bearing cups from a bicycle frame. It is designed to slide through the frame until the sprung end engages onto the top of the cup allowing for a simple hammer blow to remove...

Designed to remove and refit both Schrader and Presta type valve cores, this tool is a must when adding tyre sealant, fitting a Presta valve extender or replacing a valve core. Despite its small diameter, the knurled finish provides the grip needed to...

Allows for the quick and easy installation of headset cups and press fit bottom brackets, without risking any damage to the frame. The stepped cup guides ensure the cups are correctly supported and sitting straight when being pressed into the frame. The...