This Infrared Panel Dryer benefits from 3 1000W high output short wave lamps in three individually switched cassettes. The lamps emit short wave infrared heat ideal for optimising drying of water based paints.

Designed and developed to assist with any number of small drying processes, making it ideal for spot repairs, engine drying, adhesive stripe removal, drying filler, drying primer or just preheating prior to spraying. May be used as a stand alone system...

Designed for drying water based paints. Lightweight, composite panel dryer operates on workshop air supply. Filter prevents airborne particles contaminating paint surface. Adjustable airflow to regulate as required. Ideal for localised or spot repair....

A trade rated panel saw capable of handling large panels. The sliding beam has a heavy duty construction with a telescopic support arm under the outrigger table, to allow heavier panels to be effortlessly moved. Smooth running 2000mm aluminium sliding...

A trade rated panel saw capable of handling large panels. The sliding beam has a heavy duty construction with a telescopic support arm under the outrigger table, to allow heavier panels to be effortlessly moved. Smooth running 1600mm aluminium sliding...

With a powerful 2200W motor and a sliding beam with a 1600mm length of cut makes the Holzmann TS250F1600 saw ideal for handling large panels, anything up to an 8’ x 4’ sheet. The sliding beam of this table saw, runs on a set of bearings along...

A range of small sized panelling cutters. Ideal for veining and fluting applications. D 14.5 mm C 19.5 mm R 7.5 mm

For decorative panel and veining work. D 3/8 inch D 9.5 mm C 7.5 mm R 4.8 mm Overall length 47.5 mm Shank Diameter 1/4 inch

Shank mounted bearing follows template mounted on board surface. It is advisable that the template is at least 5mm thicker than the cutter. D 22 mm C 1/2 inch C 12.7 mm B 22 mm R 4 mm R2 5.5 mm

Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel cutters run best at lower speeds and match our...