115mm (4½") angle grinder disc purposely made to cut masonry, brick & stone. Depressed centre prevents the retaining nut from fouling the work piece so flat surface cutting can be accomplished. 22mm diameter bore means it will fit to most...

Rotates blades 90 degrees. RT/331 has two functions: produces a 45 degree bevel & a 3.0mm radius by turning the blade. Specifications: • Shank Diameter: 1/4 • Dia Metric: 27 • Cut Length Metric: 12 • Overall Leng...

Ideal for heavy duty, precision drilling in soft and hard woods, large section beams, joists, floorboarding, chipboard and plywood. Features & Benefits • Lewis flute design for rapid chip removal • Hexagonal shank for secure grip in...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 18 &...

Self-guiding cutters with the facility to change the profile by fitting a larger bearing & varying the depth. Supplied with two bearings. The larger bearing removes the bottom quirk. Specifications: • Shank Diameter: 1/2 &bul...

Durable, fully synthetic, resin-bonded X-cloth with zirconia alumina for long lifetime. Produces consistently high removal rate for stainless steel, cast iron and sheet steel. Polycotton backing material breaks down with no glazing. Changing flap discs...

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Alw...

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Alw...