Please go gentle as this is my first post and although I have searched through numerous similar posts I have not found the exact answer I am looking for!
Here goes....I have a chrome towel rail in the bathroom fed by copper pipes, which at it's closest is 0.3m from the bath. I am adding a dual fuel element to this radiator and the element will fit in the furthest side of the radiator from the bath therefore 0.9m from the bath.
I need to know how I connect this to the mains, this is what I propose, but need to know if this is the best and safest way of doing it!
Fit a chrome switched 5amp fused spur ( http://www.astra247.com/2169/Electr...pur-Flex-or-NeonP-Chrome/With-Black-Interior/ ) on the wall in the bathroom 1.3m from the bath, the supply to this fused spur will then be chased into wall and under the floor into the airing cupboard next to the bathroom where I will fit it into some sort of 7 day timer which will be fed into the ring main and back to the fuse boad, I don't have an RCD protected consumer unit, just the old fashioned fuse board!
Is this the right way fo doing it and is there anyhting I have missed?
Here goes....I have a chrome towel rail in the bathroom fed by copper pipes, which at it's closest is 0.3m from the bath. I am adding a dual fuel element to this radiator and the element will fit in the furthest side of the radiator from the bath therefore 0.9m from the bath.
I need to know how I connect this to the mains, this is what I propose, but need to know if this is the best and safest way of doing it!
Fit a chrome switched 5amp fused spur ( http://www.astra247.com/2169/Electr...pur-Flex-or-NeonP-Chrome/With-Black-Interior/ ) on the wall in the bathroom 1.3m from the bath, the supply to this fused spur will then be chased into wall and under the floor into the airing cupboard next to the bathroom where I will fit it into some sort of 7 day timer which will be fed into the ring main and back to the fuse boad, I don't have an RCD protected consumer unit, just the old fashioned fuse board!
Is this the right way fo doing it and is there anyhting I have missed?