Hello Ladies and Gents,
I am just in the middle of my sparks apprenticeship and just wanted some advice so i did not look to dim at work.
Basically there is a house being converted into three flats with a 3p supply with an additional fuse for the landlord. Each one of the flats will be having a sub-main. My question is how is the sub-main connected to the supply. Would it be each sub-main to three separate swichfuses and then tails to a tp&n board/isolator. if so then 1 flat and landlords on brown phase and the other flats on the other phases.
Any info would be greatly appreciated,
I am just in the middle of my sparks apprenticeship and just wanted some advice so i did not look to dim at work.
Basically there is a house being converted into three flats with a 3p supply with an additional fuse for the landlord. Each one of the flats will be having a sub-main. My question is how is the sub-main connected to the supply. Would it be each sub-main to three separate swichfuses and then tails to a tp&n board/isolator. if so then 1 flat and landlords on brown phase and the other flats on the other phases.
Any info would be greatly appreciated,