There is a similar post, but still need clear help for very novice. I have a bedroom (very old house) with wall light switch for ceiling light and further on a ceiling pull chord for same light. If wall switch on, pull chord can also be used to off/on, when wall switch off, pull chord does not apply. Want to remove / block-off / fully hide the pull chord and also replace the old two-wire hanging ceiling light.
Currently, Wall switch: Black to L2 and Red to COM, Cieling light mount two black, one to hanging light orange and other to hanging light black/grey. Pull Chord mount: 1 red and 1 black. Both Pull Chord and wall switch have a bare earth wire neither connected. How to block off red & black to Pull chord and to wire a new typical model ceiling light.
Currently, Wall switch: Black to L2 and Red to COM, Cieling light mount two black, one to hanging light orange and other to hanging light black/grey. Pull Chord mount: 1 red and 1 black. Both Pull Chord and wall switch have a bare earth wire neither connected. How to block off red & black to Pull chord and to wire a new typical model ceiling light.