I have installed a radial circuit but used 2.5 t&e on a 32a mcb, the circuit is just one double socket. My db is a split with a 80a rcd covering a 32a mcb for cooker and 2 32a rings, the other side has the 100a main breaker with 2 6a light circuits and a 16a immersion mcb.
I have verified no load on the cooker circuit and minimal on 1 of the socket circuits but the rcd still trips. it works with one of those plug in air freshners but not something larger such as a hoover or hammer drill.
i have replaced the cable and mcb but still nothing.
apologies if this has been covered before. thanks in advance for the help.
I have verified no load on the cooker circuit and minimal on 1 of the socket circuits but the rcd still trips. it works with one of those plug in air freshners but not something larger such as a hoover or hammer drill.
i have replaced the cable and mcb but still nothing.
apologies if this has been covered before. thanks in advance for the help.