I have been swapping over a bathroom light fitting for a new one. It has a fan wired through it, which was done by the previous owners. I took a photo of the wiring before starting, and replicated the wiring in the new fitting. However, when I switch the light on now, the fan doesn't come on. Then, when I turn the light off, the fan comes on briefly. I'm wondering if it has got out of sync somehow, and if there's a way of resetting it?!
Here's a picture of the wiring - I don't know if it looks correct or not to an expert eye. The white wires on either side go to the light fitting.
Any advice would be appreciated![/img]
Here's a picture of the wiring - I don't know if it looks correct or not to an expert eye. The white wires on either side go to the light fitting.
Any advice would be appreciated![/img]