Hi all,
I'm currently in the process of extending my home to make one large living area (kitchen/living room).
I have to re-wire the entire kitchen from scratch and have done some research. I have a wall lined with units and a separate island in the middle of the room. (hob and downdraft extractor only on island)
I have X8 double sockets
X2 single oven (electric) 3.65kw / 16Amp
X1 induction hob (electric) 7.4kw/ 25Amp
X1 microwave oven (electric) 2.5 kw/ 13Amp
X1 wine cooler (electric) 0.09kw/ 13Amp
X1 warming drawer 0.40kw / 3 Amp
X1 downdraft extractor hood with motor kw?/ 13 AMP
X1 Washing machine 2.5kw/ 13Amp
X1 Dishwasher 2.5kw/ 13Amp
X1 American fridge freezer
X1 plinth fan (electric)
TOTAL 22.69 kw
I have 100m of 10mm cable
I can wire up the sockets easy, it when I get to the ovens, hob, extractor etc that it gets complex!
On a load this big worse case senarion (xmas day!) Do I need to run a radial for each oven (10mm) and one for the hob and microwave oven respectively all with their own fused wall switch on splash back?
Or can I combine the X2 ovens on one radial (10mm)
And the hob/micro/extractor on another?
Also combining their fused wall switches?
I assume I can wire the rest of the appliances off the kitchen ring? Or is this not the case...?
I work on the logic or worse case scenario (ALL appliances running at once without tripping)
Many thanks in advance
I'm currently in the process of extending my home to make one large living area (kitchen/living room).
I have to re-wire the entire kitchen from scratch and have done some research. I have a wall lined with units and a separate island in the middle of the room. (hob and downdraft extractor only on island)
I have X8 double sockets
X2 single oven (electric) 3.65kw / 16Amp
X1 induction hob (electric) 7.4kw/ 25Amp
X1 microwave oven (electric) 2.5 kw/ 13Amp
X1 wine cooler (electric) 0.09kw/ 13Amp
X1 warming drawer 0.40kw / 3 Amp
X1 downdraft extractor hood with motor kw?/ 13 AMP
X1 Washing machine 2.5kw/ 13Amp
X1 Dishwasher 2.5kw/ 13Amp
X1 American fridge freezer
X1 plinth fan (electric)
TOTAL 22.69 kw
I have 100m of 10mm cable
I can wire up the sockets easy, it when I get to the ovens, hob, extractor etc that it gets complex!
On a load this big worse case senarion (xmas day!) Do I need to run a radial for each oven (10mm) and one for the hob and microwave oven respectively all with their own fused wall switch on splash back?
Or can I combine the X2 ovens on one radial (10mm)
And the hob/micro/extractor on another?
Also combining their fused wall switches?
I assume I can wire the rest of the appliances off the kitchen ring? Or is this not the case...?
I work on the logic or worse case scenario (ALL appliances running at once without tripping)
Many thanks in advance