Today I had my old 3 inch waste stack removed, so a new 4 inch one could be installed and a new toilet connected up to it.
The 3 inch was connected to a 4 inch pipe at the base, so was expecting this to be quite a simple job.
However it appears as if there is an obstruction in the drain a few inches down (see picture). Any ideas what this might be, and if so, is there a way to remove it?
The 3 inch was connected to a 4 inch pipe at the base, so was expecting this to be quite a simple job.
However it appears as if there is an obstruction in the drain a few inches down (see picture). Any ideas what this might be, and if so, is there a way to remove it?