- Joined
- 1 Jun 2017
- Messages
- 195
- Reaction score
- 3
- Country
Hi all,
I'm trying to replace an old LAP PIR that was connected to the a bathroom light & extractor fan with a new one.
The current LAP one from Screwfix is a different design now, and I can't seem to get it to work.
I have a single live that is shared between the 2 live terminals, and I also have 2 neutrals into the 2 neutral terminals. I can hear a switching click sound when I re-apply power, but no light or extractor fan.
The new one is rated 1kw incandescent, 500w fluorescent and 250w led. Maybe the light and extractor fan is too much load, but the old PIR still works ok.
Any ideas?
Thanks.
I'm trying to replace an old LAP PIR that was connected to the a bathroom light & extractor fan with a new one.
The current LAP one from Screwfix is a different design now, and I can't seem to get it to work.
I have a single live that is shared between the 2 live terminals, and I also have 2 neutrals into the 2 neutral terminals. I can hear a switching click sound when I re-apply power, but no light or extractor fan.
The new one is rated 1kw incandescent, 500w fluorescent and 250w led. Maybe the light and extractor fan is too much load, but the old PIR still works ok.
Any ideas?
Thanks.