One of my sons has a leaking rad push-in fitting, pic attached. Plastic pipe. I haven't had much to do with these, but told him to try pushing the pipe in further, if it will go. There's a bend in the pipe further along so should be enough movement.
Am I right thinking the black plastic ring can be pushed back, and that will allow the pipe to be pulled out? (after draining of course!).
If so, is it then possible to remove the grip ring and O-ring, and renew the O-ring.
Any other ideas?
Any help appreciated!
Am I right thinking the black plastic ring can be pushed back, and that will allow the pipe to be pulled out? (after draining of course!).
If so, is it then possible to remove the grip ring and O-ring, and renew the O-ring.
Any other ideas?
Any help appreciated!