Hi,
in my new garage I have some 50x50 plastic trunking all around the perimeter inside at roof level and I plan to drop 20mm conduit down to each switch / socket...
silly question but what is the best way to make sure a drilled hole in the trunking will line up with the conduit once it's mounted with saddles on the wall?
Thanks
in my new garage I have some 50x50 plastic trunking all around the perimeter inside at roof level and I plan to drop 20mm conduit down to each switch / socket...
silly question but what is the best way to make sure a drilled hole in the trunking will line up with the conduit once it's mounted with saddles on the wall?
Thanks