- Joined
- 4 Sep 2022
- Messages
- 625
- Reaction score
- 3
- Country
Greeting!
I am in the process of converting my log burner into an (waste engine) oil burner
I am using 8mm copper pipe as the fuel supply and supplied from a pump. But I want some way to control the flow to turn the fuel supply down and up. I have used the typical 8mm gas taps in the past as regulator for regulating gas supply https://www.toolstation.com/mini-le...8__o650bEEjd6aPSxcAaAseKEALw_wcB&gclsrc=aw.ds
and find them very fidlly indeed! it is almost as though they are desinged for on off only with no in the middle
Any surgestions on a slow control 8mm tap please
Thanks
I am in the process of converting my log burner into an (waste engine) oil burner
I am using 8mm copper pipe as the fuel supply and supplied from a pump. But I want some way to control the flow to turn the fuel supply down and up. I have used the typical 8mm gas taps in the past as regulator for regulating gas supply https://www.toolstation.com/mini-le...8__o650bEEjd6aPSxcAaAseKEALw_wcB&gclsrc=aw.ds
and find them very fidlly indeed! it is almost as though they are desinged for on off only with no in the middle
Any surgestions on a slow control 8mm tap please
Thanks