Hi all,
Ok regulation wise, and theoretical wise (which seems ok IMO):
Is it ok to 'double up' one of the fuseways so that you end up with 4 L inserted into it. Its still protected by a 32A mcb but two rings will then be on 1 fuseway.
I could of broke into the existing ring and extend it but this is very awkward considering all the leads leave the CU and go straight into ceiling (half inch away)
Did intend to originally use the previous 30A cooker fuseway, which was a cooker but is a 1 socket radial in kitchen now but the cable in that fuseway is too heavy to add any more cable.
Thanks for advice!
Ok regulation wise, and theoretical wise (which seems ok IMO):
Is it ok to 'double up' one of the fuseways so that you end up with 4 L inserted into it. Its still protected by a 32A mcb but two rings will then be on 1 fuseway.
I could of broke into the existing ring and extend it but this is very awkward considering all the leads leave the CU and go straight into ceiling (half inch away)
Did intend to originally use the previous 30A cooker fuseway, which was a cooker but is a 1 socket radial in kitchen now but the cable in that fuseway is too heavy to add any more cable.
Thanks for advice!