Hi,
I have a Danesmoor 26/32 oil fired boiler. I have just replaced the burner nozzle and oil pump and have set the oil pressure to 115psi. But, I am not sure at what value the air valve should be set to obtain the correct air:fuel ratio.
Should I be measuring the flue gas CO2 content and, if so, with what ?
I have a Danesmoor 26/32 oil fired boiler. I have just replaced the burner nozzle and oil pump and have set the oil pressure to 115psi. But, I am not sure at what value the air valve should be set to obtain the correct air:fuel ratio.
Should I be measuring the flue gas CO2 content and, if so, with what ?