Recent content by absolute

F.28 could be coming up because your regulator at your meter has had it (this will be fixed free of charge by the gas board, but will need to be identified by a gas man first). Have you tried pressing the re-set button? Also was any work being done in the road on your gas main? F.28 or F.29...

Hi guys, Went to a call out the other day to find a thermastatic shower that was leaking and broken. I'm trying to avoid breaking open the wall as it is a nice place and will be imposible to get matching tiles. Thje shower was bought from bath store in 2000 and is believed to be made by...

Thanks, will try that, I don't think it's paticularly dirty or anything just want to make sure no crap gets to the new boiler. i'm fitting a magna clean as well so should be ok. If the pump has had it though surley filling loop open and hose connected should shift i?. Close all but one rad and...

Can you open the filling loop with a hose connected to a drain off to remove sludge ect? i am replacing a boiler tommorow as the old one has totaly gave up (yes i am gas safe) i can't afford a powerflush as i am just starting up and am unable to put cleaner into the old system as the boiler is...

Are you On a 1 pipe system? (are the flow and return picked up from the same pipe)

is the drip near the taps?

Hi, i was looking at the myhammer site and was wondering if anyone can tell me what happens and if it's any good. I am trying to start up on my own and i could use all the help i can get.

I wasn't sure but was told by 1 guy at a local plumbing supplies place that I should fit this boiler, to be told by his work mate that it wasn't man enough. I have gave them a price for an ideal pro logic+ as well now this give 14-16 litres per min so seems a better choice as they get a 5 year...

will a worcester 30si be able to keep up supply to a 4 bed house with 2 bathrooms?

I need to put inhibitor into a pressurised system but the rads are the rolled top ones (no removable vent) any tips????

I was told to attatch pump, release presure through prv, keep it open and pump until vessel reaches and holds charge. Is this the correct way?

sounds like the a problem with the automatic bypass.

sounds like pcb to me.

What did the guy do to decide there was a blockage on the return? The fact that it is not fireing and you have no hot water sugests to me that that is not the case.

any advice on cleaning / de-scaling heat exchangers? Any advice on removing them?