The pre-set time schedule appears to only set back the temperature about 5 degrees in an off period and down to 10 degrees overnight. Our controller is in a community building with very differing daily heating requirements, some only for short periods. With the old system, programmer and stat...
Grundfos UPS fitted in vertical position (25 years) needs replacing, replacement indicates the the shaft should be horizontal, however this will require a re pipe around the pump which will be a problem as it is 1" MS and a tight location. Any easy get outs?
We are looking at a purchasing a leaf blower for our Village Hall. It is rated at 1450 watts. Because of the distances involved we would need up to 2 x Extension Cables
Specifications:
- Length of cable: 50m
- Cable: 3-core 1.25mm
- Sockets: 4 x 13amp 240v
Apart from safe routing of the cable...
A large 30KW oil fired system, about 25 years old. About to replace with gas, condensing boiler. Would it be prudent to rip out the old system and renew all components(existing system working OK, just that oil is too expensive)
Would a good power flush be enough?
TIA
A4l
Please can anyone help
We need to source a Low Pressure( 1.00m head) self closing tap
for our community center.
What make/model would you recommend?
Regards
A4l
The Boss wants me to remove for cleaning the plastic moulding under the door. Removed the two screws at the side but it will only move about 30mm
Please will some kind person give me some advice
Thanks
A4l
I don't think I will get another winter out of my 20 something years old wall hung Myson boiler, not a Combi.
I have had a guy in to give me a quote and he said that I MUST have a condenser? boiler and recommended a Worcester. :?
Is this correct and what make of boiler would you learned...
Thank you all for your help & advice.
We will start replacing the pipework section by section next week.
Breezer, we will be employing a Corgi approved installer.
Lor, will now be using copper pipe, we are in the country with hungry rats and mice; the thought of the poor devils being scalded...
We have had a Worcester 24SiII Combi fitted in our Village Hall for some 3 years. This is now losing all its pressure over a 24 hour period. We have checked all valves and exposed pipework for leaks as well as making sure the relief valve is not blowing off.
The rest of the pipework mild steel...