Recent content by andymac5

thanks a full length access panel it is then, it would need vented to the outside? so the pipe ruining along near the floor would be ok to be behind the stud wall?, would need a guard or protective paint to stop corrosion ?

Thanks for all the info, that helps loads. The walls are already double skin. im going to get a builder in to do the work. i just wanted to check if anything needs doing to the pipe.(like moving). so by the sounds of it i can just get it boarded up with vents, Would it need a shield to...

Thanks what about the plasterboard :)

42086/81413_49456428.jpg[/net] Hey guys. heres a photo of my gas pipe in my garage, its runs from the meter and runs along the bottom of the wall. (photo needs rotating 90) what I wanted to know is, if I can plaster board over it. as I want to convert my garage into a room. I thought...

gas pipe

what would you recommend?? the HRT was only cheap!!

thanks, the black doen't have anything on it, just plane black

[img=http://aycu05.webshots.com/image/49764/2003301599730798912_th.jpg]

here the old one and new one!!

i've got an old landis & gyr thermostat which i wanted to replace with an Horstmann HRT2 i brought. the problem is the wiring!! the landis & gyr thermostat has 3 terminals labelled 2 3 1 in that order. red to 1, black to 2 and nothing in 3. with a earth on the inner case. The HRT2 has 4...

Hey peps. Maybe one of you could help me out. i've moved into a new place(but old house) and some of the work done is a bit of a DIY disaster. Basically i wanted to change my radiators. Is it possible to find out which is the Flow pipe and which one is the Return pipe, so i can maker...

thanks sleepyhead. Took side panel off, disconnected then reconnected the flow meter. Seems to be working fine now. Top Job

just checked it again and its back to 7 flashes :oops: hehe