Recent content by bav

Hi, did you sort this problem. If so, what was the cause and what did you do. I have the same machine and today the Start/Pause button has started to flash and nothing else is working. Thanks

Pete, I have the same boiler and have had the same problem. This is the diverter valve. This is not difficult to change. You just need to change the front part and the valve, which is held by two grub screws. These screws can be removed with an Alan Key and the front twists off. Don't forget...

It's a Triton 80 and it 9.1 kw

Can anybody help ? I have a Triton electric shower and recently when showering it keeps stopping. What happens is that you start showering and after about 30 minutes the water stops although power is still on. If you turn the shower off and wait about 5 minutes then turn it back on it will be...

I have had the same problem in the past and was told the same by the person who cut the key. I found later he was talking rubbish. I went to another key cutter and he cut me another key and it worked fine. He told me that it was the blank that the first peron used. He should have used a...

I don't have a proof of competency but am asking the question to see if their may be something simple to try before calling in an Corgi engineer. It worth having some idea of what the problem could be so you know if when you call an enginee her or she is not ripping me off. I have been stung...

No. I am not Corgi Registered.

I have a back boiler with a Baxi Bermuda Heater. Yesterday I tried lturn the heater on and found it woundn't work. I took the front off the heater and found that the heater did lite but the flame only stays very small (like the flame on a cooker oven when you first start it). The flame doesn't...

Can anybody help ? I have a Potterton Combi 80 Combi Boiler (not Puma) and the hot water keeps going hot and cold. An engineer has visited the boiler and changed the Diverter Valve and the Air Flow Switch. He has taken out the water input restricter as he said the problem seemed like the...

Thanks for your reply Chris. What used to happen was the pipe going connected to the back of the diverter valve was getting very hot and the pipe leading to the first radiator. But as soon as the pipe got hot the boiler flames would stop. After a while the flames would come back on for a few...

Can anybody help? I have a Potterton Combi 80 boiler, which is about 8 years old. Last week I had a problem with system. The Rads were only getting warm (not hot). The water was working fine, although every now and again I would need to press the lockout button as the boiler would cut out. I...