Stop pestering the guy, Daisy. You are bordering on the obsessive. If he wants your help he'll ask for it.
I'm asking for help now - will anyone help me please?
Hi, It's me back again!
I've checked the hold off supply (A&D) in the box and it is just over 13v. Also, the LED in the bellbox is red confirming the presence of the hold off supply.
The bellbox goes off loud when I open it but no strobe and when I set the alarm off from the panel there's...
Hi Chaindaisy,
I don't have a main exit door contact - I'm using a PIR facing the front door for the entry zone.
The panel is stable now and has not gone off since I put the link in to disable the tamper
Does a domestic system really need a tamper?
I now have a test meter but don't...
Hi Guys,
I don't know what's been going on with all these deleted posts?
I've got hold of a test meter from my nephew, but can someone tell me how I go about using it?
Thanks
Barry
Hi Guys
Thanks for replying.
Sorry, I've not replied sooner, but the Mrs went out the other day and slammed the door and the tamper alarm went off, so I've been busy trying to find that problem. In the end I've removed the tamper as I can't really see why it's necessary in a domestic...
Hi
After about 4 years I've eventually got round to trying to get my alarm up and running.
I seem to be having problems with the bell box
I only had a 4 core wire running to the bell box so have wired it up as follows:
Panel Bell Box
(T) -ve tamper...