Recent content by brianfrost

back filled system got two out of three rads third furthest away from boiler cold

Ok so I asked this a bit back but am sill having probs boiler keeps switching on and off about every 5 minuets, had a man in to look at it and he thought it was a block, so i have replaced a lot of pipe work, that is all i can get too, so no blocks on the cold feed from tank and outlet from...

I have a problem with may dish washer, all it is doing is filling and emptying, no program is working and it will just keep on going and going, the water does not seem to be heating. can any one please help as i am getting dish pan hands

sorted backfill, will i just need to do it the once or will i be able to tell when the job is done.Boiler is now firing up for about 10 minuets cutting out for around the same time and the relighting. would appreciate a little more help from one of you fine gents

how would i find the block section to cut it out,and if i was to backfill it would that be from a rad, the block looks like it is between the pump and tank

not much help used hammer, can any help,blocked coold water feed, need to no how to clesr it, geting desparet wife on my back :cry:

how can i check for blocks in cold feed and how can i clear it, big hammer not working

don't know welder not plumber, good with big hammers,can you help

just removed pump looks ok opened valve either side of pump, no water

boiler fires up but only runs for 2 to 3 minuets, just removed pump looks fine, but when i opened stop valve on ether side of the pump there was no water, loft tank is 3/4 full

any more ideas as a welder i make a terrible plumber

looks clean, would that stop rad filling

the tank is 3/4 full and can hear it fill when i open the other two rads, third is still dry, is it possible rad is blocked stoping the flow of water

I have a problem with a glow worm space saver 38. When it is turned on it fires up runs for 2 to 3 minuets and then turns off. The pump looks like it is going and have 3 rads downstairs. Problem started when i bled one rad. Water runs from 2 rads but not the one I bled