Recent content by budgie

I am about to build a shower enclosure in my new ensuite. I know that I should be using aquapanel prior to tiling but this is not an option in this case. What treatment should I apply to the walls prior to tiling? One wall is new plaster and the other is plywood (not marine)

In my ensuite the two walls in the shower area are plaster and plywood. Can you advise on treatment before tiling onto each.

In my ensuite the two walls in the shower area are plaster and plywood. Can you advise on treatment before tiling.

Thankyou Damocles.

Can I assume then that there is no need to return the 4mm cable back to the main earth block and that it is sufficient to make connection into light or shower fitting. The reason I asked question in first place was I`d read it was bad practice to return this 4mm cable to the main earth block...

Supplementary bonding from bathroom. First time I have asked a question on this forum. Little surprised at tone of reply!!! We are not all experienced electrician.

Can someone explain why it is not good practice to return the cable to the main earth block.

Thankyou Felix for quick response

I am just starting to build my ensuite bathroom. I am unable to supply with hot water from the tank so I am using a small 3 Kw wall heater. My question is will the mono tap on the wash basin work if only supplied with cold water?