Recent content by Corkydon

Hi CC11 It may help if the PVC pipe goes inside the Cast pipe unless you can get an adaptor or correct fitting to slide over the pair of the pipes, thats why i would suggest a universal flexible joint. As long as both pieces of pipe are cleaned up and within a fairly close tolerence there...

Hi Agile I spoke to Keston regarding their fixed price repair and they want £285 + the vodka & tonic. That's £342 of my good English pounds. Double that and I have a new boiler on trade discount. So I will defo try and repair before next spring when I will rip the pile of poo out! Shame really...

Sorry 4-5 months of the year

Thank you Agile but to be honest I was not intentionally going to take as long as I had & spend as much as I did on the project, I have made the house as green as possible and being an electrical/mechanical engineer I appreciate good workmanship that takes time when your doing all the work...

HI CC11 depending if the pipe is vertical/horizontal with a slight incline or not. I would personally leave a spigot in order to slide a AC4000 universal joint over at each end of your new piece of pipe and only leave a 15mm gap to the cast spigot and this will give you room to work with. Then...

AC4000 rubber couplings are usually used as joints and even repairs from plastic to cast or salt glaze pipes. You can see pics on the web. To be honest if your going to to be doing a bit of renovations for the sake of how much 110mm plastic waste pipe or whatever size you'll be using is, you may...

:cry: I bought a Keston qudos 28s back in 2009 under recommendation of flue lengths,not being mounted on an external wall and also good for UFH because of it's modulating pump. This was purchased well in advance of actually finishing my house (never ending project) and also being commisioned...