Recent content by danfoss01

Hi, Just had this fitted,but tonight noticed the white strobe flashing on the Texecom Bell box as well as the orange and red LEDs. Could someone tell me what is the difference between 'Strobe NO' normally open and 'Strobe C' common?

It looks like a Texecom Premier Odyssey

It's the square keypad. I'm sure the engineer told me all were linked out,and given that we had no bother for twelve months I assumed that was the case. The log just illuminates the Tamper light and bleeps - no other info I'll have to get him out again. I do know that all the Tamper...

Hi fOLKS, Similar to the 'False Alarm Hell' thread,we were getting random Tamper faults so had the system checked.All looked fine (Keypad,PIR's,Bell Box ,battery etc) no sign of loose wires or corrosion - so as a last resort we got the Tamper circuits disabled. All fine for twelve months but...

It is - in quite a few places.Just posted that pic as an example.

I have a table and chairs in cast aluminium which need re-furbishing.What would be the best way to remove the old coating?Power washing?Wire brush? I'll probably just repaint with Hammerite or similar

Good man - thank you! :wink: :wink:

Could someone identify this type of screw for me please.It's from my garden bench which i have taken apart to repaint. The screw takes a M6 bolt internally and is 12 mm wide by 18 mm long (open ended).I need to source six replacements. Thanks.

Yeah - thanks,i'm hoping that will solve the problem.

Ooops! Just noticed the sticky which says NOT WD40 - will try a suitable lubricant :wink:

Hi Folks, I am having a bit of trouble with a Worcester Bosch 50/70 OOO boiler in that it sometimes does not switch off at the last OFF time,and keeps heating the water etc Other random things happening include the boiler starting,but not igniting or heating the water - it needs switched off...