Recent content by des606

Thanks for your help. I'll order one and put a 3amp fuse in it.

Hello, My LG widescreen display has a power cable a bit like a laptops. Jack in back of display, to box unit, and then a clover head plug to 10amp 3 pin plug. It's too short for me. I like to buy a 2-3m version of the last bit - clover head plug to 10amp 3 pin plug. Can anyone send me a...

EflImpudence, yes I mean it's missing, it doesn't have one. I'm hoping to buy one similar to the 2 existing ones I mentioned like this: 333rocky333- yes I'm aware of that. Blup - yes I will disassemble and ensure continuity. Anyone have a recommendation for a basic tester for continuity...

Hello, I’m looking to rewire a couple of old table lamps and a floor lamp. All brass / metal. The floor and newer table lamp have brass bayonet lamp holders with what I think is an earth terminal on the outside and two terminals inside. Am I correct in thinking that the earth goes into...

Hello, Bought a top floor apartment a year ago. Some serious draughts coming into loft space via these circular holes / channels in concrete slabs in the walls. Photos attached. Can I go ahead and fill them in with concrete? The draughts are full blast at times. Thanks

Hello, I have removed skirting board in order to lay oak floors and, as expected, quite a bit of the plasterboard wall has come with it in places. The walls are metal stud walls and don’t have any sole plates and limited (if any) wooden studs. In the places where all of the plasterboard has...

Hello, Can anyone advise me as to the options (other than welding) to securely re-attach these feet, which I think are brass, to this copper planter? I do have a MAPP blow torch and a soldering iron if either are any use. Any advice appreciated, Thanks

Hello, Main bathroom shower barely has enough hot water for one short shower after gas boost has been on for an hour but water is still hot in kitchen / ensuite etc. It is slightly better with immersion on for one hour but still results in a very short shower, very hot water for very short...

Hello, Can this LED batten be wired to a plug with a 3 amp fuse? http://www.lyco.co.uk/deltech-20w-cool-white-led-batten-2ft.html Thanks

Hello, I want to set up extraction for my small workshop. My machines are as follows · Hammer N4400 Bandsaw – with 120mm port · Makita LS1013L Compound Mitre saw · Trend router table · Pillar Drill I’m considering buying this extractor ...

Hello, I’m building a large garden storage box (1800mm x 1100mmx 800m – with two front hinged doors) from treated timber and at this stage plan on putting most of it together with a nail gun. I'm just about out of the nails which came with my new Bostitch FN1664-e Magnesium Finish Nailer 16g...

Cheers Job and Knock, I should have made it clear in my post but I'll mainly be using the compressor for nailing and pinning in a wood workshop - bought the hose reel on impulse as I'd thought it'd save space. But as you point out it's a fairly thick hose and more suited to perhaps...

Hello, After two previous failed attempts, with suppliers providing me with a damaged unit and a leaking unit, I've finally got delivery of a compressor which I hope to use for pinning , nailing and possibly some other applications. Here's the model I settled on...

Hello, Rented my apartment out recently and have been told by my letting agent that there is a small leak from gas combi boiler, which has according to plumber, been caused by hard water corroding the boiler’s cylinder . The bolier is only 6 years old so I was a little surprised. I will...

Hello , I’m interested in these two compressors, the first: http://bostitch.ie/products/compressor-details/c50-u/ lists noise levels as : LWP 71.2 and LWA 94 the second: http://www.metabo.co.uk/Product-catalogue-halfstationary-and-stationary-tools.23957+M55434b445c2.0.html...