Recent content by garethj

I wish to add an additional radiator to my central heating system. The system runs off a balanced flue Baxi 552 and is not a combi or pressurised system. I was looking for advice on where to connect the radiator into the system. Unfortunately I cannot get access to the area where the...

Thanks Steve - installed every thing today and all works a treat ! Many thanks for all your help.

Many thanks Steve. If you can, can you just confirm this is correct: My permanent live is going to the perm live of the switch timer then looping across to the common on the pneumatic switch. I am then returning the switch live from the timer switch to my lamps and looping off this switch...

Pneumatic switch has a comon and two switch terminals (marked normally open and normally closed). I wasnt sure if I needed to run the switch lives independemtly from both switches to the lamps or whether I could loop between both switch lives as I will will the permanent lives.

I require them to come on weekdays between 4.30 - 6.30 then on demand as nessesary

Sounds like what I want to achieve, not sure how to wire them in parralell,can you point me in the direction of a wiring diagram???

Wonder if anyone can help. I have a number of outdoor lights that previously worked off a one way switch (they are not PIR sensored). I wish them to operate automatically for 2 hours every evening (stay on constant for 2 hours) and also have an independant pneumatic switch that I can operate...