Afternoon Gents
I am hoping you may be able to help me out.
I want to replace my existing damaged Drayton RTS1 Room Thermostat with a Drayton Digistat +. The existing thermostat has three connections coming from the 280 RSF boiler into its base plate/terminal block, these being:
Terminal N –...
Many Thanks for the help, have just got it sorted. davy_owen_88 was right I had connect the neutrals to the wrong neutral bar. Just need to have it tested and certified by the local councils aurthorized inspector and I can get the whole new extension passed by BCO.
Again many thanks
Hi Chaps
Need some help with a problem I have got? I have just finished wiring a new ring circuit into my new kitchen extension. Checked all of the sockets with a ring main tester and they all test out OK. The problem is when any load is applied to the circuit the consumer unit RCD is...
Many Thanks for the help.
Have got Part P under control, have been in touch with the building officer with regard to the whole works in the kitchen extension.
Hi EC
The cables runs are as follows:
a) The oven 6.3m from the consumer unit to the isolator and 1m from the isolator to the connector unit. 3.8m to be through joist the rest plastered in the wall.
b) The oven 6.3m from the consumer unit to the isolator and 2.6m from the isolator to...
I am in the process of replacing our stand alone cooker with a NEFF built in double oven (U1442) and NEFF induction hob (T4243).
The oven rating is 5.9KW and the hob is rated of follows:-
Front Left - 1.8 to 2.5 KW
Back Left - 1.8 to 2.5 KW
Front Right - 2.2 to 3.3KW
Back Right - 1.4 to...