i fired up the system with a match and had the heating on constant for the last hour or so and am also getting hot water, i have left the heating on constant but turned it off at the room thermostat and i am still able to get hot water. i also get heating when i turn the room stat on, i can...
Hi there.
I have a Ferroli F24b boiler. The red lock out light keeps coming on. If I reset the boiler it starts up again, but after about 15 seconds the red light comes back on.
It seems as though it won't ignite. I can light it manually with a match, and the heating and hot water will...
is this any better - maybe i could look for the EnglishGrammerNot website next
hi there i have a ferroli f 24 b and the red lock out light keeps coming on, if i reset the boiler it starts up again and after about 15 secs the red light comes back on. it seems as tho it wont ignite, i can light...
hi there i have a ferroli f 24 b and the red lock out light keeps coming on if i reset the boiler it starts up again and after about 15 secs the red light comes back on it seems as tho it wont ignite i can light it manually with a match and the heating an hot water will stay on and even reignite...
cable is running about 8m from the consumer unit and is enclosed in trunking for about 4m and the other 4m through joists then running down wall behind plaster board the last 4m the cable is on its own and the first 4m it is in 75mm x 75mm plastic trunking but this would be with other cables...
hi am fitting a fan assisted 4.9kw doulble oven and am using 4mm cable and a 32 amp double pole switch is it safe to put the switch below the work surface with easy access available or would there be a better way of doing it also would a 32 amp mcb be sufficient