Just make a new Diaphram for your existing siphon if u cannot find a source for a new one, easy job, just remove siphon from cistern, remove diaphram and use as a template to cut a new one. plastic from a 5 litre
oil container or bleach container etc will do the job
Thanks for the clarification, I should have explained that apart from having an unused consumer unit I also had leftover 6mm cable and 45amp pull switch
Hi, thanks again for speedy responses, the use of the 40 amp is purely so that I can use the consumer unit I already have because as far as I am aware Wylex do not make a 45 or 50 amp for this consumer unit
Hi, thanks for yor speedy response's....I have bought a 40 amp Mcb to use for an electric shower........have had the consumer unit I intend to use for the shower a few years now but it is only fitted with up to 30 amp type 2 fuses.....the shower will 9.5 kw and the run of 6mm cable will be...
Hi, Could anybody please tell me the differences between Wylex NB type 1 and type 2 MCB'S, I have just bid and won a type 1 on Ebay and have only just now realised what I really needed was a type 2.