My boiler has finally packed up and it needs replacing. I am on a BG contract and they are offering discount but I am not sure the boiler they are offering is good.
The exiting boiler is a Gloworm 120. I have megaflo and one of those red expansion vessels.
It is a large 5 bed house with...
Hi
If you're a gas engineer working TODAY or TOMORROW and cover HP2 (Hemel Hempstead) please could you pm me - my tenant has called to say that boiler has suddenly stopped working and the agents are closed.
The boiler is less than two years old and is:
Worcester Greenstar 30CDi Regular...
Here are the three connections into the black Antiference box
From the left:
First cable comes from the splitter attached to the Labger box.
Second cable comes from the top left Taldis unit at the bottom
Third cable disappears off via the trunking
Also the Output cable on Teldis...
Chris Thanks again. I cant try all of what you suggested just now as I will need to make a cable as you suggested.
However, (without disconnecting other cables) I did try:
"Next, start by connecting the TV to the output of the Taldis box. Power back up and do a signal check. The quality will...
Sam - please could you explain that in terms of the cables. I think you are saying that I should take the second cable fro the top splitter and rater than it being plugged into the leftmost terminal on the black box it should be connected to something else?
I thought may be this black box...
Thanks Chris.
Connecting a TV direct to the Top Labgear output marked TV works perfectly. Looking closely, the splitter connection was actually a Belling, otherwise known as an IEC :wink:
So this means that aerial is OK. I tried with two different TVs and the signal quality improved to 91...