Recent content by kr1s1991

Thanks to all. I just got round to what corgigazza suggested, using an o-ring and silicon grease and the problem has been solved. No more drips!!!! Thanks again for everyones posts!! :wink:

the waters coming from the front, there is a bolt with a hole in the middle and the drip is coming through there! [/list]

How much are the diaphragm kits (do they inc the washers) and where can you get them... Thanks for the help! :wink:

Whenever we use the grill on our cooker the igniter keeps clicking continuously, if you shut the door then it stops but the grill only works if the door is open. Any suggestions !! Thanks :)

We have a baxi 80e boiler, for some time now it has been dripping from the left hand side, i have looked in the manual and it seems to be coming form the 3 way valve assembly. Is there a replacement part that can be fitted to solve the problem. Many thanks b.t.w, it seems to leak more at...

Breezer, Would you recommend using 1.5mm T+E instead of the 0.5mm - would i just connect the live and nuetral and cut back the earth??

Im after a 'fused switched socket with a neon light' to be used as a spur from a socket ( main ring ) in the kitchen to goto another socket ( under a cupboard ) for the dishwasher to plug into, only problem is i have got all my other sockets from screwfix (georgian brass style) and they don't...

I am installing 5x20w surface mounted downlights in the kitchen, i have a 105w transformer (dimmable) which just has two wires from it ( no earth ), anyway i would just like to know what cable i should use to connect the lights. Focus and B+Q only seem to sell 0.5mm twin cable which it says is...

Thanks, i have decided to go for the slab as suggested looks easier to install, thanks again

Would you be able to use loft insulation or should it just be left for what it says :roll: :- loft insulation

anymore thoughts on the above.....or should i just connect a socket instead of the fused switch and plug the cooker hood in, and spur off the socket for the lights??? :?

I would like to insulate a studded wall and was wondering if B&Q or similar sold anything in rolls ( i.e similar to loft insulation ). Has anyone any recommendations. Thanks :D

I would have thought it better not to bring one wire down from upstairs and to keep downstairs seperate, just for the reason that if you have the whole of downstairs except one socket on one ring, and you remove the fuse or mcb for the new downstairs ring would it not be easy to forget that one...

the fused switch is a break in the mains, so does the hob fan already count as a spur?? eg. say i used a single socket instead of the fused switch and plugged in the hob fan i believe i am still able to spur from the socket ( using it as a juction box, can i not do the same with a fused switch :?:

I am trying :? to work out the best way of connecting some low voltage downlighters to the mains for the kitchen cupboards, i have a fused switch which in on the main ring ( 1 wire in and 1 out ) ready to be connected to a hob fan and was wondering whether i can still spur off this to supply a...