Recent content by Londondude2

Thats the problem, this circuit has two bedroom electric heater on it + socket in hallway for a lamp (which used to be the hallway heater). Not sure if this is allowed according to regs, or I can just label the consumer unit and the socket and I'm good.

Hi all I own an electric only flat, with two dedicated circuits for the electric panel heaters. Years a go I swapped out the hard wired panel heater in the hallway for a single socket, which I use for a lamp. I'm now about to rent out the flat, and EICR is booked tomorrow. What should I do...

Hi all This is a very basic question, I’m looking to get my immersion heater elements swapped, as they barely work, I suspect crusted with Limescale being in London. The tank seems to be facing the wrong way, so it’s not actually possible to access them from the front like in most videos...

Thanks chaps. It was oddly on one of the two electric radiator circuits in the flat. The circuit it's currently on is powering a 1200w electric radiator in the main bedroom, 800w in the spare room, and a lamp (the hallway radiator removed and is used for this light instead). Those radiators are...

Hi all I’ve got a panty / cupboard in a new (20 years old) flat, with an alarm outlet, plus a covered electrical point with a bunch of various wires, which I have no clue what they are for. I’m trying to find a spot to plug in my cordless vacuum for charging, it wont be pulling very much power...

Sorry to revive an old post, but does the pairing apply with all bpt agata panels?

Hi newbie here. Hoping someone could help, I’ve been refurbishing my flat and the old phone now looks very out of place. It’s a bpt ykp/200 video intercom. I’ve found that this has been replaced by The agata vc200, which looks like it has a colour monitor. Is this an easy job? I can see...