Recent content by MartinDIY2010

  1. M

    Runnig Satellite Coaxials before plastering

    Thanks Chris, Got it now. Only difference is im going to run the satellite coax inside because ive got a bay window above the obvious point of entry. Thanks again for your help. Martin
  2. M

    Runnig Satellite Coaxials before plastering

    Ok I think ive got it now. So if I wanted to run sky to my front room and then set up the suggested output to additional rooms, with the distrubution centre located in the loft (without external cables), I would need to run the following - 1) Satellite co-ax from loft to the front room - for...
  3. M

    Runnig Satellite Coaxials before plastering

    Thanks for the advise so far! Would you be able to give me an example of such a unit! This is all brand new to me so I admit im a little confused! Would a unit of this kind take an input from a Satellite dish and a Digital arial so that I would only need one outlet in each room (i.e. both...
  4. M

    Runnig Satellite Coaxials before plastering

    Ok so ive got 2 coaxials to my main room and into the loft and 1 coax from the loft to each room where I expect to have a TV. Will the Central Ditribution Point be it TV (arial) or Satellite require power?
  5. M

    Runnig Satellite Coaxials before plastering

    Im currently rennovating a property to live in. I am runnning Satellite coaxial to the lounge and all of the bedrooms to provide connections for terrestrial TV but have been told that this would work equally well for Virgin/Cable or Sky. Ive been told to run 2 cables to the lounge and one to...
  6. M

    Cutting Holes for Downlights

    I have recently purchased 2 sets of downlights which I have never fitted before! The hole sizes stated are 66mm and 72mm. I cannot find a 66mm hole cutter anywhere and wondered what size up I could use to create the hole. i.e would a 72mm hole for the 66mm downlight be too big and what...
Back
Top