Hi we have painted our stair case that was bare wood. We used an oil undercoat and gloss to finish, four coats of each. We still get a yellowing bleeding through. Im thinking we should have primed the wood before undercoating.
To solve do I
A: Sand back to bare wood & apply a primer, then...
So if I'm careful with what I buy I could do what was in my original post? I'm still considering brush plates which would mean less connections but I'm undecided if I like them or not.
I have an awkward house with a conservatory in the way of a natural external cable run from the sky dish. What I was planning is this. from the sat box in the living room is to have wf65 cable say roughly a 1 to 2M (guessing standard sky issue) to a wall plate that will connect to another wall...
15mm to the radiators, Theres onlly about four meters of 22mm which comes across the kitchin then up into landing area bends around the stairs then straight into a 15mm reducer which then goes around the house.
maybe to simplify what im trying to say is should Itry and run as many tees from 22mm as possible instead of tee everything from after it was reduced. Hopefully thats clearer
Just wondering if i should extend 22mm Flow & Return. I have a combi boiler where the 22mm goes upstairs then feeds through the bathroom on to the landing then before it goes to any rads its reduced to 15mm then tees off feeding one rad downstairs then tees again feeding 3 downstairs & 2...
Hi, I'll give you some background to what's existing before I share my plans. 3 Bed Terrace with Combi. Recently moved in before the winter, The main living room is L shapped with patio doors to garden and another set off double doors leading to conservatory. The conservatory has two rads one of...