Recent content by Money4nowt

  1. M

    Hot water/heating issues. Doing my swede in!

    Thank you razor. Great help. I knew something was wrong. Done my head in trying to fault find.
  2. M

    Hot water/heating issues. Doing my swede in!

    Offending link wire removed!! Boiler now fires correctly when room stat turned up and goes off when stat turned down. Also fires when I open the hot water valve manually( as I still think I have a faulty head as doesn’t open when time clock on and no hot water, I’ve checked the head has power...
  3. M

    Hot water/heating issues. Doing my swede in!

    Could I remove the link my self. I’m quite handy and doubt I’ll kill myself. I will try change parameter in the morning to see if that works first.
  4. M

    Hot water/heating issues. Doing my swede in!

    It does run on 5 which I think from memory is hot water. Even when it’s heating the rads it’s 5 and not 6.
  5. M

    Hot water/heating issues. Doing my swede in!

    Razor - how do I change parameter? You say ignoring time clock but when I turn clock on and turn up room stat boiler fires and all rads heat up. Picasso - I think my hot water valve head is knocked as doesn’t open when called for.
  6. M

    Hot water/heating issues. Doing my swede in!

    Yes system boiler. Cylinder upstairs. I can’t figure it out. I’m a site manager and have a bit of knowledge of heating systems but can’t figure this out.
  7. M

    Hot water/heating issues. Doing my swede in!

    Is the link pre wired as a factory default. Why would it need removing? If wiring issue is causing boiler to fire when not called for why would only one radiator be getting hot. Surely the whole circuit would be?
  8. M

    Hot water/heating issues. Doing my swede in!

    Let’s see who can figure this out. New Intergas boiler fitted to new position during conversion of attached double garage into kitchen. Prior to new boiler being fitted no hot water so I opened the valve into manual to give me some time to change the head. I had two new radiators in...
  9. M

    boiler not fireing?

    just to let you know i hade british gas come and look at the boiler, turned out the fan had ceased up so full marks to whoever said that!!
  10. M

    boiler not fireing?

    i wouldnt open it but what do you think it could be, just so i know so i can ask the plumber so i dont seem like a mug and get stung.
  11. M

    boiler not fireing?

    its not a sealed pressurised system, ive tried the overheat trip swith next to the dial on the boiler and it doesnt click or appear to have tripped.
  12. M

    boiler not fireing?

    nope a round flu out of the back of the boiler, two pipes at the top and one below which im pretty sure is the gas. i dont know if this would be of signifcance but at the weekend i opened up a radiator n the spare room which has definately been shut off since we moved in, just over a year, my...
  13. M

    boiler not fireing?

    its a Gloworm Ultimate, not a combi i have a storage cyinder gravity fed system with two tanks in the loft. when i turn boiler on and off the electrics 'sound' ok and i can see a red light behind the thermastat come on but nothing else?
  14. M

    boiler not fireing?

    my boiler appears to have packed in. room stat turned up no ignition from boiler, opening hot taps no ignition from boiler. i turn the boiler off via its thermostat and back on, i think the fan starts spinning but it doesnt sound as loud as i think it normally is. both zone valves on the...
  15. M

    Boiler not firing. Pump constant run.

    Hi all. Quick update. I got up in the loft and my small tank was bone dry. It looks like the cold feed to the tank was turned off because of a dodgy ballcock, it doesn't close fully so over fills. I filled the tank and turned the switch on in the ac again. Boiler fires again and works fine. I...
Back
Top