Recent content by montechristo

So I need to go back and chase them for it then? this ight explain why he was annoyed at not being able to tap into an existing circuit

Guys, Over the last couple of months I've read a lot about what needs to happen post Part P, and while I'm still not 100% clear on a lot of it. It did raise a question in my mind about life before Part P. We moved in 2003 and one of the first jobs we had done was a new Conservatory...

well quite frankly BG are crap however if and independant had replaced 50% of my boiler and had over 12 visits to solve a simple problem, it would have cost me way more. Granted you'd hope an independant wouldn't be that useless in the first place. However in the south east, I can't get...

doubt it

scary thats exactly what I have. so seriosuly anyway I can check for a stuck automatic vent? is it worth replacing them with manual vents?

Just talking to a mate who reckons that every high point on the heating system should have either an automatic or manual bleed point. just wondered if there is such a thing as too many?

here is the situation. I live in a bungalow fully pressurized system. there are 14 Rads, 3 of which are towel rail rads each room is on a separate zone, with it's own thermostat/timer each zone is a separate drop of pipe from the main loop that runs through the loft. After...

just to give you an update. after changing half of my boiler BG eventualy tracked down the problem to a leaky heat exchanger. Once replaced both my cutout problem and dropping water pressure are as you would expect gone. They also ended up replacing the burner as they couldn't get it to...

wll I'm guessing your right aboput the airlock having spent all last night withthe boiler banging and poping like you wouldn't beleive the rads are now working again. strange

so what else would cause a pipe to go from roasting hot to stone cold over teh course fo 1 inch of pipe?

thanks guys much appreciated

Guys, a second opinion would be appreciated. The System 3 years old Fully pressurised megaflow hot water cylinder Gloworm 30sxi condensing boiler each room indivually zoned with own thermostat exception is main/onsuite bathroom which are on teh same stat and diverter valve...

anybody? anyone tell me what actual diameter a 25mm and 16mm tail should be?

not really you think he pulled a fast one?

just checked the paperwork, it was done under rtheir homecare cover so evidently engineer chappie didn't see teh need to actually list the parts :-( however he did mention a the time that the parts were in the region of £23 if that helps?