Hello.
Sorry forgot to post the PDF document. This is the celotex handy guide from the website. Please refer to pages 34-35.
Thanks
https://docs.google.com/viewer?a=v&pid=explorer&chrome=true&srcid=0B5AyT2n3VyJuODI2MDk5OTktYjUzOC00YjY2LWJkZTItYzI5OTk0N2I5NWYz&hl=en_US
Hello
Our existing flat roof is leaking, and looking to replace with warm installation.
the area to cover is 19m2.
I thinking of using Celotex TD4126 flat roof insulation deck , with consists of 5.5mm WBP ply deck, vapour control layer and 120mm insultation.
Trying to put a shopping...
I have taken the rear panel off the machine , switched on with rinse cycle, and watched for leaks. As the drum is moving I can see water dripping in front of the drum from in inside the machine.
It is difficult to tell exactly where it is coming from without taking the front off completely...
Hi, want to upgrade old double plane iron rads in my house, but not sure what size convertor type will be suitable?
From what I have been told, convector type rads are more effectient than older type, hence a smaller convector rad will output similar heat to a larger iron one.
Is there way...
Sorry, I got mixed up, you need a qualification to install unvented system. Looking for someone that will be confident in installing a thermal store system.
Does anyone know of any qualified Thermal Storage installers who might be interested in doing a job in Enfield?
Need to upgrade current system, that means new boiler, Thermal Storage Tank etc
Cheers
Ok, I have now decided that Thermal Storage system is what I wanna go for. Read some stuff here;
http://www.gasapplianceguide.co.uk/thermal_store.htm
http://www.hotwaterlimited.co.uk/thermal_stores.htm
Does anyone know of any qualified Thermal Storage installers who might be interested in...
The Glow Worm sounds like a very go solution to the unvented cylinder. Looked at the spec and the DHW flow rate is 14 l/per min, where as the unvented can, from what I understand, deliver considerable more.
The movie clip has phased me, wouldn't want that to happen in my house. Looks like a...
Thanks everyone for their thoughts!
OK just had an installer come round to give price on system.
If thinks it best to go for the Rolls Royce of boiler systems: Heatrae Sadia Megaflo!
Reasons
-High Pressure,
-Flow rate, upto Up to 72 litres per minute depending on adequate supply...
Would everyone pretty much go with that?
So would you recommend a system boiler with unvented clyinder, so I can get high pressure hot and cold to all taps, plus free up loft of tanks?
Hi
Replacing old backboiler conventional system for combi for following reasons;
-High pressure cold and hot water supply to both bathroom and kitchen
-remove unsightly cylindar in bedroom, together with exposed piping running from lounge to loft
-free up space in loft
-hot water on...