Recent content by Pete E

Unfortunately, all the existing sockets are required...I think I will replace the existing single gang backbox with a twin back box and mount an FCU next to a single socket..

Sorry, that's my poor wording...the socket I intend to fit will be fed from a socket that is already a spur....

The house was built in the 90s and I *think* all the sockets are on one cct. That excludes cooker, immersion and shower of course...Would need to double check, but I think the way forward is just making it a fused spur...The spur will only be used for a TV, so current draw really won't be an...

Thanks for that...it would be a lot of work to replace the existing wiring with 4mm, and I would probably just get a spark to incorporate the spurs into the ring main first...My present plan involves about a meter of cable to proved a spur off an already existing spur, but it just means I need...

I have unfused spur going to a single double gang socket...This spur is fed from a single gang socket which is part of the ring main. I now want to add another socket off this spur, so need to change it to a fused spur. The usual way of doing this is fitting an Fused Spur Outlet.... Rather...