I'm looking for hardwood for furniture and cabinet making. Just some standard types would do.
I'd seen the list before - but hadn't spotted that there are a lot more companies in the map link.
It's always good to hear people's opinions of a supplier.
Does anybody know of any good sources of hardwood near Chester. I have a planer/thicknesser so sawn timber is fine and I'm not looking for anything too exotic.
Installation looks recent - I'd say less than 10 years. All pipework is 22mm.
Sounds like you're recommending 28mm on the header side - not sure I can get 3' head but wider pipe must help - about 60% more flow I reckon
Thanks Gasguru,
That's what I thought too, but it was more than 30 years ago since I did O level Physics.
It's in standard 22mm copper but there are quite a lot of elbows, so it might be worth trying to reduce the number - I believe bends have lower losses but require more pipework skill...
What affects the hot water pressure - is it?
1. The head between the header tank and the cylinder OR
2. The head between the cylinder and the taps
The previous owner of my house installed the (standard indirect) hot water cylinder in the loft and the hot water pressure is poor. I don't...