If you see my other question on page one,I have filled the sytem and bled the rads but got an error code 03 which is vent the system.the boiler wont fire up
The filling loop isnt a braided pipe,it is a copper pipe with two valves on this type of boiler.I have a fairly good understanding of plumbing,but got a bit put off by someone saying the pressure vessel will need pressurising.There is no air when depressing the shraider valve
My system was drained down so I have refilled using the loop.I have also bled all the radiators.My Ferolli F24 boiler is showing a fault 03 code which is air. Is there an air vent on the boiler or do I keep bleeding the radiators. The hot water is running fine. Also the pressure clock is not...
you can change the bubble gasket around the rebate to a slightly thicker one.this may help to stop some of the draught.alternatively you could fit a sash jammer.as well as extra security you can fit different wedges to adjust how tight it fits which will pull the door in,these are easy to fit...
How come you have a wooden cill on a upvc frame.this should have been removed when it was fitted.the idea of upvc is it doesnt rot. you can fit a new cill with the doors in place. first get yourself a upvc cill.make sure it is wide enough ie 150mm or 180mm etc. cut it to length.if need be remove...
Hi Gents,not used this forum for some time.I have moved in to a house where there is a ferolli DOMI Condens boiler fitted. The boiler is approx 2 years old. The previous owner has drained the system down. How do I refill it again. It also seems there is no air pressure in the vessel. Do I need...