Recent content by razoray2006

  1. R

    40mm waste capacity

    Hi Guys, A month ago I installed installed a double power shower (2 showers in one enclosure). I have used 40mm waste pipe which is "T"d from the wash basin also 40mm from the trap. From where the waste joins the waste there is one 90degree elbow and then a straight run of 2.5-3m till the...
  2. R

    Negative head Pumped shower..

    Hi Guys I have recently installed a pump on a gravity hot water fed system, the pump is fitted at the base of the hot water tank and the shower is on the same floor level with the valve being the same height as the top of the hot water tank. The problem is that the shower heads are about 1...
  3. R

    Fitting a water pump

    Hi guys I live in the top floor flat of a converted mansion and have terrible hot water pressure. I intend fitting a pump to the system but here is the problem... I don't have a cold water storage tank in the loft as the loft is very small and the mains water is the only source of cold...
  4. R

    Fitting a heated towel rad

    Thanks guys most appreciated.
  5. R

    Fitting a heated towel rad

    Hi Guys I wish to fit a Heated towel Radiator in my bathroom. Now I know how to fit the element to the radiator but what I want to find out is as there is no central heating does the radiator have to be filled with water in order for the whole towel rail to get hot rather than just the area...
Back
Top