Recent content by rcs

Well I think I'm going to replace the wardrobe backs, clean up and insulate the wall with radiator reflecting material. Will also get some wardrobe heaters for the void. Does anyone know how much 25 Watts costs to run? Thanks for all your help.

Well I've still done nothing and the mouldy smell is back and now need to resolve before decorating. Does anyone know if removing the backs of the wardrobes would be beneficial in the short term? I'm considering hacking the existing plaster off the brick (solid wall) and dry lining with a...

Hi Wanted to run an idea past a few of you. I have a carcass type wardrobe against an external wall and have damp/mildew/mould issues as there is little airflow behind it. It's up to the ceiling and a good 3 mtrs wide. My idea (having spent most of the day cleaning up behind it today) is to...

The glass is on the inside of the door so there is a recession of approx 30mm from the front face of the door.

Hi all We have a hardwood front door with lots of glass, and is the weak point in the house for heat loss but it's mainly noise from the main road that I want to suppress. I have 2 options, the first is to replace the front door but I'm wondering if it's possible to replace the existing (very...

Good gen!! Many thanks for help. rcs

I did think of putting a few side by side, but even then, the output will still be quite low. I've seen some old fashioned type radiators that have a towel rail built in but they are of an old fashioned style. I would prefer something modern. Hole in the market or a niche? Thanks for the...

100x5.0, so that's a no. 10? Would just 2 of them per cabinet suffice? Thanks for the reply. rcs

Hi all. Have searched and read but can't find a satisfactory answer on what the best way to secure kitchen wall cabinets is. I have Ikea cabinets that have 2 angles per cabinet with a serrated mounting plate that allows for adjustment. Each plate is secured with 2 1/4" stubby chipboard...

Well that's the way I'm thinking at the mo. Could always get a hanger for the towels over the rad (no airing cupboard). Might not look as good but come winter (and new born!!!!) I think I might regret not putting in a rad.

Well I can put a 700Hx400W Towel Heater, but would that provide enough heat for the size of room? Cheers Hangover and mortgage research? Not a pleasant combo!!

Thanks for the reply but that's the point. I only have 700mm of height to play with. Not sure what the heat loss is but the room is only 4 sq mtrs with 2 insulated outside walls and a large window. Cheers rcs

Hi Does anyone know of a towel radiator that gives off a decent amount of heat but will fit under a window? The size would be limited to 700mm high but length is upto about 1500mm. I'm still considering just putting a normal rad there as having a warm bathroom would be more important than...

Being a Saturday and all the good tool stores closed, I decided to use the Dremel option which worked with no problems. Tap now fitted and Wife off my case, lol! rcs

Thanks for the replies. Don't know if q-max will cut stainless but will try and let you know. Cheers rcs