Recent content by Redhotferrari

Hi Guys, Any thoughts on how to drain a megaflow without a drain cock? The bloody idiots who installed it years ago neglected to put one on and just put the inlet control set straight onto the inlet of cylinder!!!! Not to mention the cold PRV does not discharge into the tundish but goes...

hi Guys, I need to run a waste pipe from a macerator (no option and tried to talk them out of it!) from understairs and run along the joists in the ceiling and also run a shower waste from the upstairs bathroom along the same route. My problem is i cant fit the shower tray and toilet etc...

Have you checked that the pipework is definately gravity for hot and cold? The last one of the those i worked on works on the venturi principle so the pipework you have is unbalanced supplies, the cold will be mains which pulls the hot gravity through giving a pretty deecent shower...

Hi Charnwood, Yep, thats the stuff

Thanks for the reply, apart from the pipe clips, which i was unaware of being available for the conduit pipe i already know all the items you have mentioned. I thought my question was pretty easy really, i just want to know does the conduit make the polypipe more rigid than polypipe without...

Hi Guys, Has anyone used this in 15mm before? Just wondered as it is designed to go into a screed floor, does it lay flatter and more rigid than normally polypipe when rolled out? Just thinking of getting it to lay flatish and straightish before the floor is screed. Welcome any comments...

No more response then Tony!!