Recent content by rich1983

Good evening I had major issues trying to get my hall lights to work with a fibaro dimmer module. Spoke to guys at Vesternet who help try a few things and came up with a solution. Problem is now none of my switches will work and they ask me to consult a electrician. I have attached...

Yes I need to look at this closer as I checked and there is no power at the board which should be 16v Anything else it could be?

I have power going to the transformer.

Afternoon All I have bought a DSC 1864 alarm system. I am having issues getting power to the keypad. I have used a multimeter and i have power going to the transformer but i have no power coming from the transformer :( Any help would be great Rich

Evening All I currently have some downlights in the sofits of my house and i would like to add a few more. At the moment the lighting circut on the main board has 3 breakers for the lighting in the house. Its all labbled wrong etc. What i would like to do is the following if possible...

Hi Thanks for the info. Going to install cable tomorrow

No just one but will be easy enough to run to both

This is the setup i have.

I only have 3 wires at the light fitting

you keep the normal light switch. this sits in the back box

Fibaro Relay module, There Dimmer modules are good for UK wiring as the relay module requires a N wire.

Hi I have attached picture of inside of light fitting. the bottom connection is labelled N and wire going into it. Just take a feed from here correct? Rich