Recent content by T-1000

Doggit, you literally saved my life :) Worktops are in.. just need to finish the cut outs for the sink and hob Thank you.

Doggit if I use the 2.45 for the sink and left side, that'll leave me with a gap of 1.9m for the right side and the shortest worktop is only 1.85m... if i cut/join the worktops like picture B... the centre i.e. sink side would be approximately 1.5m ie enough for the shortest length sorry if...

Please ignore the crude nature of my illustrations.. I have drawn a mock up of the kitchen http://imgur.com/a/mZcWI Pic A is the actual kitchen Pic B is how I envisaged your suggestion.. Please let me know if I got you wrong I have the following worktops 2x 2.45m 1x 1.85m Now if I cut/join...

Doggit before I get excited and rush off and make more mistakes, I just want to make sure that I'm clear on everything I have a U shaped kitchen http://i.imgur.com/dFQEl6y.jpg I was going to make the cut just like the pic.. However the female joint is 10cms too short to the wall Following...

Thanks guys.. but I've really screwed the pooch with this one I got my calculations wrong and ordered a worktop length approximately 10 cms shorter than the space it is meant to fit into Ordering a longer worktop is out of the question, as I already have the longest one that the company...

I have a U shaped kitchen and the walls are not square (approx 10-20mm out) I have cut the male and female joints What I wanted to know is whether I need to make the cut outs to join the worktop first.. Or should I scribe and cut off the excess in order to get the male/female flush to the...