Recent content by Tarragonrookie

Thanks guys, can't imagine how the average homeowner deals with this, unless they live with the pump cycling on its own. Good to know I don't need to connect a permanent compressor

Having discovered a couple of years ago, what happens to the pump when the pressure vessel has lost its pressure over time (pump starts on its own and runs for a few seconds) I fitted a new pressure vessel. I was unable to find a leak in the old unit. Two years down the road and I had to...

Thank you for your advice and guidance, it's much appreciated. Cheers

It's a brick aperture in an out building.

I've got 35mm where the hinge screws (30mm) will go and over 45mm around the rest of it. As I've cut it now, It's job done. I will let you know if the door falls off. Good on you for helping bird brain's like me!

Thank you for your response. If I remove the 10mm, I will still have 35mm frame depth at the door face and 45mm depth at the widest point. I think this will leave the frame strong enough. Best regards

I have a Howdens hardwood external door frame and door that need to be made 20mm narrower to fit the brick opening. I'm torn between simply taking 10 mm off the sides of the frame or carry out some carpentry on the joints and reduce the door and frame size by 20mm. This is more work, but does...

We currently have two Siemens 12 year old built in ovens, one a microwave combo and the other a conventional oven. They have been excellent products and we are considering replacing with new Siemens/Neff equivalent models. There is nothing wrong with ovens, just a desire to buy the next 12 years...

Five years ago we refurbished two bathrooms to high specification and fitted two Swiss Schneider Graceline cabinets. These are not cheap at well over a grand each. Since installing these, we have experienced a high level of mirror door edge deterioration. One cabinet is now on its third set of...

Great feedback Stem, your suggestion makes a lot of sense and is much appreciated. Many thanks

I am thinking of installing Hive and have a query I cannot find the answer to. I have a Honeywell programmer and wired thermostat. Is there any experts among you who can answer the following questions please: 1.Can i keep the Honeywell programmer and thermostat wiring for possible future...

Hi all We have a ten year old Bosch Siemens SE65T390GB integrated dishwasher that I would estimate has run for approx 3,500 wash cycles. It started to leak at the door seal which is an easy fix. I have started to research getting a new model in case it has reached a point of being unreliable or...

To add a comment to the above post, does anyone know if these USEONG RIV valves suffer from hard water scale build up that prevents them from operating?

I have a Bosch KA58NP90GB/07 fridge freezer (I think its a Daewoo). The water dispenser is intermittent.Mains pressure ranges from 2.7 bar to 3.5 bar. Filter, pipework etc is fine, you can also hear the dispenser switch and solenoid valve operating. The two way water control valve (Bosch part no...

Gentlemen Thank you for your extensive knowledge and being generous enough to take the time to provide some very useful information, it is much appreciated. Thanks again and best wishes to you. T